Gotek with HxC firmware doesnt see other than HFE format files

HxC Floppy emulator support for all others computers...
Post Reply
lalcaraz
Posts: 1
Joined: Fri Sep 19, 2025 11:30 pm

Gotek with HxC firmware doesnt see other than HFE format files

Post by lalcaraz »

Howdy!

Long time Flashfloppy user, I jumped into HxC as I heard it has better support for my TRS-80 Model 4P disks format but I found that I can only select .HFE images and the oled is not listing any other file format.

I wonder if it’s due to a CFG misconfiguration or it’s by design.

Any other TRS80 users who could share your thoughts about this issue?

I appreciate in advance your help.
Jeff
Site Admin
Posts: 8263
Joined: Fri Oct 20, 2006 12:12 am
Location: Paris
Contact:

Re: Gotek with HxC firmware doesnt see other than HFE format files

Post by Jeff »

What are these "other file format" ? The HxC firmware support IMG / RAW files. Please see the currently supported images :

https://hxc2001.com/docs/gotek-floppy-e ... mages.html

But since it seems you are using it on a TRS80 i suppose you are talking about dmk, jv3 file images :

dmk files : not supported "natively" on the Gotek and i don't plan to support this natively on the gotek. Supported by conversion with the HxC tool
jv3 files : not supported "natively" on the Gotek and i don't plan to support this natively on the gotek. Supported by conversion with the hxc tool

Pure raw files : "dsk/img files" : supported, but may need some configurations to set the disk geometry to emulate. I can add an entry in the firmware to make the setup easier if you provide me some typical dsk files.
Post Reply