
Anyway the machine I would like to use the emulator on has an edge connector floppy, is there an easy way to convert from an edge connector to the dual in-line connector? I'm checking out the following two links and there seem to be a couple differences, like there are 2 selects and 2 motor enables on the dual in line as apposed to the 4 selects and 1 motor enable on the edge connector. (do these actually matter with no actual drives?)
http://pinouts.ru/Storage/5_12_floppy_pinout.shtml
http://pinouts.ru/Storage/InternalDisk_pinout.shtml
Has anyone had any experience with this yet?
Thanks again
Xarion