But there's one thing I don't understand. I am using the file selector V 1.85a and it works fine as well but after rebooting the Amiga, I can't find a way to change the disks in the slots for drive B. With the "Prev"/"Next" buttons I can only cycle through the files in the drive A slots and the AUTOBOOT.HFE but there's no way to access the files in the drive B slots. Pushing the "Enter" button shortly brings the AUTOBOOT.HFE up and lets me cycle through the drive A slots again. With a longer push on the "Enter" button the HxC leaves the file selector mode altogether and the display shows the AUTOBOOT.HFE again with "Choose a file" below it. Even then I don't have access to drive B - I have to choose a file first and then, after a longer push on the "Enter" button, the function menu appears where I have to choose the "Select a drive" topic and then switch to drive B.
So my questions are
- is there a way to access the drive B slots while the HxC is in file selector mode?
- is it possible to put the HxC back into file selector mode without rebooting the Amiga?
Any help would be greatly appreciated - thanks a lot in advance!
I only wanted to know if I can put the emulator back into this mode without rebooting when it's in the "normal" mode (in which I have to select and insert the disks on the emulator itself). But that's not so important - the file selector itself is such a great tool and it's no problem to do a quick reboot when I want to get the emulator back to "slot mode"...