Copy from SD-card to CPC6128-internal drive

[mswintie]

Hi,
I've configured my HxC SD Slim and everything works perfectly.

Now I would like to copy some games from the 4Gb SD card to my internal 3" drive on a floppy disk.(about one or two games per disk-side)
Is there anyone who could explain this to me, step-by-step, since I'm a complete noob

Do some switches on the HxC need to be reset?
At this moment the first two switches on the left-hand-side are switched 'on'.

I have a centronics ribbon cable to connect the HXC-slim to my CPC6128.

Problem is that my internal CPC 6128-drive is not recognized anymore with this setup.

So when I use "disckit3" I select 'copy from drive a to drive a', I have to disconnect the cable each time when writing to the internal drive.
This is not a healthy situation..
Isn't there an easier way??

Many thanks for your patience and help.

Michael from Belgium

[Jeff]

I am unsure if you can copy a disk to another disk on CPC, but if you can, this is the same procedure as before (with real drives).
You should ask this to some CPC forum.

[mswintie]

Thanks, but the main issue is that my internal drive is not recognized whenever the HXC is connected to my CPC6128.
Whenever connected the HXC has become the |a drive AND |b drive. The internal drive doesn't work unless the HXC is disconnected.
Most probably my settings are wrong..

Kind Regards

[TFM]

Connect your HxC as Drive B with Drive A enabled. See handbook, it depends on the setup of the jumpers. It works fine for me - like a regular drive