yaswaka P150 gotek
yaswaka P150 gotek
yaswaka P150 model YD-645B1545B floppy drive modified with Gotek to use a USB drive. Because the signal line pins of the floppy drive and the Gotek are reversed, during the modification process, the signal cables for both Gotek units at positions A and B were plugged in reversed. The Gotek at position A works normally, but when using the Gotek at position B, it displays 'DISK NOT INSERTED OR DISK ERROR'. The jumper settings for the Gotek at position A are S0 and JC shorted, and for the Gotek at position B are S1 and JC shorted. How to specifically solve this?